PRECISION FIT FOR CHEMICAL CONTAINMENT
- Precision fit and superior chemical containment
- Corrosion-resistant exterior with no exposed metal, reduces maintenance
- Ideal for corrosive and abrasive chemicals
- Removable air motor for easy maintenance
There’s no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they’re dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.
ChemSafe 515 Diaphragm Pump | |
Maximum fluid working pressure |
0.69 MPa, 6.9 bar
|
Minimum air startup pressure |
0.21 MPa, 2.1 bar
|
Fluid inlet and outlet size |
1/2 in. bspt
|
Maximum suction lift (reduced if balls don’t seat well due to damaged balls or seats, lightweight balls, or extreme speed of cycling) |
Wet: 9.5 m, Dry: 3.3 m
|
Maximum size pumpable solids |
4 mm
|
Minimum recommended ambient air temperature for operation and storage. NOTE: ChemSafe pumps may be operated in low-temperature environments. Take care to avoid freezing or crystallization of the fluid inside or outside of the pump. Running the pump at temperatures below freezing may accelerate the wear of the elastomer components in the pump. |
0° C
|
Air consumption at maximum flow |
.82 scmm
|
Fluid flow per cycle |
0.160 liters
|
Maximum free-flow delivery |
60.6 lpm
|
Maximum pump speed |
381 cycles per minute
|
Weight |
9 kg
|
Wetted Parts |
PTFE, EPDM, NBR, UHMWPE
|
Maximum fluid temperature | |
PTFE Pumps |
100° F
|
UHMWPE Pumps |
70° F
|
Noise (dBa), Sound power measured per ISO-9614-2: 1997. Sound pressure was tested 3.28 ft (1 m) from equipment. | |
Sound Power | |
At 100 cycles per minute |
58.9 dBa
|
At 381 cycles per minute |
81.8 dBa
|
Sound Pressure | |
At 100 cycles per minute |
64.8 dBa
|
At 381 cycles per minute |
82.3 dBa
|