EQUIPMENT THAT WORKS AS HARD AS YOU DO
- Reduce unplanned downtime and maintenance costs
- Improve operational safety and maintenance costs
- One pump, multiple configurations – maintains fleet uniformity
- Heavy-duty, IP69K and 24VDC, oil and grease
Graco Electric Dyna-Star Automatic Lubrication Pump
Description
The Graco Dyna-Star HP and HF 24VDC Electric Lubrication Pumps compliment our Dyna-Star 10:1 Hydraulic and Fire-Ball 300 50:1 Pneumatic pump offering.
Now you have three power source options for automatic lubrication systems and transfer applications.
Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.
Features
- Auto Fill Shut Off – mechanical shut off of fill pump for a clean and efficient refill.
- Graco Advantage Drive™–heavy duty gear drive–lubed for life.
- Tube-in-tube vent and fill path–convert drum to injector system instantly.
- Vent valve mounted directly to pump–no more brackets or extra hoses and pipes.
- Motor control–speed and AMP control.
- Cold weather performance (-40º C).
- More efficient seal replacement.
- Optional AC to DC Power Converter Box.
- Enables the use of 110 to 230 VAC power to run the 24 VDC Dyna-Star HP and HP pumps.
- AC to DC Converter box comes with mounting and wiring hardware making installations easy and flexible.
- Remote Fill Manifold with Vent (with built-in pressure gauge) allows you to conveniently locate the fill port where you want it.
Dyna-Star HP and HF Lubrication Pump |
|
Maximum Fluid Working Pressure |
|
| HF Models |
24.1 MPa, 241 bar
|
| HP Models |
34.47 MPa, 344 bar
|
| Electrical Requirements | |
| All Models |
24VDC
|
| Wire Terminal AWG Size for Control Board |
24 to 10 AWG
|
| Input Voltage Range | |
| 24 VDC |
18 to 32 VDC
|
| ON/OFF Signal Voltage Range and Current | |
| Voltage Range |
5 to 32 VDC
|
| Drive Resistance |
1.1K
|
| Peak Operating Current | |
| 24 VDC |
35A
|
| Peak Power | |
| 24 VDC |
720W
|
| Pump Output | |
| HF Models |
See Performance Charts in manual
|
| HP Models |
See Performance Charts in manual
|
| Weight – Pump Only | |
| 35 – 60 lb Tank / Reservoir |
22.7 kg
|
| 90 – 120 lb Tank / Reservoir |
25.0 kg
|
| 400 lb Tank / Reservoir |
27.2 kg
|
| Wetted Parts | |
| Pump Wetted Parts |
Steel, polyurethane, acetal, buna-N, aluminum, polyester elastomer
|
| Operating Temperature | |
| HP Models |
–40° to 65°C
|
| HF Models |
-10° to 65°C
|
| Storage Temperature HP and HF Models |
–40° to 65°C
|
| Humidity Level |
90%
|
| IP Rating |
IP69K
|
| Audible Sound Pressure* | |
| 1000 psi (6.89 MPa, 58.95 bar) Models |
70.7 dB(A)
|
| 2000 psi (13.79 MPa, 137.9 bar) Models |
71.4 dB(A)
|
| 3000 psi (20.68 MPa, 206.84 bar) Models |
71.4 dB(A)
|
| 4000 psi (27.58 MPa, 275.79 bar) Models |
71.2 dB(A)
|
| 5000 psi (34.47 MPa, 374.74 bar) Models |
70.6 dB(A)
|
| Cable | |
| Cable Gland Thread |
M25
|
| Cable Range |
9 – 16 cm
|
| *Sound power was measured per ISO-9614-2. | |
Dyna-Star® HP or HF Pump Low-Level Indicator Kit; Dip Stick Kit |
|
| Low-Level Indicator | |
| Low-level sensor switch |
Normally open sensor switch; closes upon low level
|
| Operating temperature range |
-45°C to 65°C
|
| Switching power |
10 Watt Max.
|
| Switching current |
0.4A-Max.
|
| Switching voltage |
5 to 32 VDC
|
| Contact resistance |
0.150 Ohms-Max.
|
| Body thread |
3/4 inch NPT(m)
|
| Wetted parts | |
| Cable |
nylon coated stainless steel
|
| Crimp tab |
stainless steel
|
| Dip Stick | |
| Body thread |
3/4 inch NPT(m)
|
| Wetted parts |
zinc plated steel
|
Dyna-Star® HP Vent Valve Kit |
|
| Maximum working pressure* |
24.1 MPa, 241 bar
|
| *Dyna-Star HP Pump models are rated for 5000 psi (34.47 MPa, 344 bar) maximum working pressure, however, when a vent valve is installed on the HP pump, the maximum working pressure must be reduced to 3500 psi (24.1 MPa, 241 bar). | |
| Inlet/Outlet Sizes | |
| Outlet (marked “0”) |
3/8 in. NPT(f)
|
| Inlet (refill-marked “1”) |
3/8 in. NPT(f)
|
| Pressure Relief Valve | |
| Factory set pressure |
27 MPA, 275 bar ± 10%
|
| Reset pressure |
80% of set pressure
|
| Relief Rate (Flow capability depends on viscosity, type of fluid, temperature, etc.) |
0.4 liters/minute @ 24.1 MPa, 241 bar
|
| Solenoid Valve | |
| Flow (Flow capability depends on viscosity, type of fluid, temperature, etc.) |
0.65 liters /minute
|
| Wetted parts |
zinc plated steel, carbon steel, aluminum, fluoroelastomer, polyurethane
|
| Weight |
1.8 kg
|
| IP rating |
IP65K
|
| Solenoid Coil: Resistance (DC) (Ohms) |
@20°C
|
| 24 VDC |
0.83
|
Auto-Fill Shutoff Valve for Dyna-Star® HP or HF Pump |
|
| Maximum working pressure* |
34.4 MPa, 344 bar
|
| Inlet/Outlet Sizes | |
| Outlet (marked “0”) |
3/8 in. NPT(f)
|
| Inlet (refill-marked “1”) |
3/8 in. NPT(f)
|
| Maximum flow |
7.6 liters/minute
|
| Wetted Parts | |
| Valve |
neoprene rubber, zinc plated parts, stainless steel, chrome plated pats, plastic acetal
|
| Seal |
fluorocarbon
|
| Temperature | |
| Working temperature |
-25°C to 50°C
|
Dyna-Star® HP Pump System |
|
| Maximum working pressure* |
241 bar, 24.1 MPa
|
| *Dyna-Star HP pump models are rated for a maximum working pressure of 5000 psi (344 bar, 34.47 MPa), however, when a vent valve is installed on the HP pump, the maximum working pressure must be reduced to 3500 psi (344 bar, 34.47 MPa). | |
| Reservoir overflow port size |
1/2 inch NPT
|
| Reservoir fill port size |
1/2 inch NPT
|
| Lubricant outlet port size |
3/8 inch NPT(f)
|
| Reservoir wetted parts |
steel, buna-n rubber
|
| Pump wetted parts |
See manual 332514, Dyna-Star HP and HF Pump
|
| Vent Valve wetted part |
See manual 332519, Dyna-Star HP and HF Vent Valve Kit
|
| Grease Capacity | |
| Models 77X101, 77X103, 77X105 |
41 kg
|
| Models 77X100, 77X102, 77X104 |
27 kg
|
| Sound Data | |
| All pumps |
See manual 332514, Dyna-Star HP and HF Pump
|
Fill Valve |
|
| Maximum fluid working pressure |
34.4 MPa, 344.7 bar
|
| Relief value |
34.4 MPa, 344.7 bar ± 10%
|
| Maximum fluid flow |
7.57 liters per minute
|
| Outlet port size |
3/4 inch NPT
|
| Vent port size |
3/8 inch NPT
|
| Inlet |
ISO 7241–1, Series B standard hydraulic quick disconnect, 1/4 inch coupling
|
| Wetted parts |
Parts: zinc plated steel parts; Seals: Buna-N
|
| Weight |
2.3 kg
|
Applications
- Oil Transfer
- Grease Transfer
- Off-road Lubrication
- Series Progressive Lubrication
- Single Line Parallel Lubrication
- Single Line Resistive Lubrication
- Spray Lubrication
Request a Quotation
www.graco.com
