HIGH VOLUME OUTPUT AT HIGH PRESSURES
- Customisation for a variety of applications
- No vent holes to prevent leaking lubricant
- Convenient top-mounted cycle pin indicator
- Built for the harshest environments
Graco GL-1 Series Grease Injectors
Description
Custom fit your system with Graco’s adjustable GL-1 series grease injectors.
Designed to meet the needs of each lube point, these precision-honed systems provide years of reliable operation in the harshest operating environments.
Choose between the standard GL-1 or GL-1 HCP (High Corrosion Protection) models or for heavier duty applications that require higher output select between the GL-1 X or GL-1 XL.
Features
- The GL-1, GL-1 HCP, GL-1 X, and GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
- Includes an adjustable hex head nut to make adjusting the output simple.
- No vent holes and fully enclosed press fittings to prevent leaking lubricant
- Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
- Rugged, single piece uni-body design built for the harshest environments
GL-1 Injectors |
|
| Maximum operating pressure |
241 bar24 MPa
|
| Suggested operating pressure |
172 bar 17 MPa
|
| Reset pressure |
41 bar 4.1 MPa
|
| Output volume per cycle |
adjustable: 0.008 to 0.08 in³
|
| Wetted parts |
Carbon steel, stainless steel, copper, fluoroelastomer
|
| Recommended fluids |
N.L.G.I. #2 grease down to 0°C
|
GL-1 HCP (High Corrosion Protection) Injectors |
|
| Maximum operating pressure |
24.1 MPa, 241 bar
|
| Suggested operating pressure |
17.2 MPa, 172 bar
|
| Reset pressure |
4.1 MPa, 41 bar
|
| Output volume per cycle |
adjustable: 0.008 to 0.08 cubic inches
|
| Wetted parts |
carbon steel, stainless steel, fluoroelastomer
|
| Recommended fluids |
N.L.G.I. #2 grease down to 0°C
|
Applications
- Single Line Parallel Lubrication
