Call Us Today! +27 11 389 5300 | sales@flosolve.co.za
The Graco G3 Standard Automatic Lubrication Pump is a cost-effective automatic lubrication pump designed to support a wide range of industrial, on-road, and off-road applications.
It is built to deliver consistent lubrication performance in systems where a simple, externally controlled solution is preferred. With no internal controller, the Graco G3 Standard Automatic Lubrication Pump integrates easily with existing machine control systems or external PLC setups, making it a practical choice for cost-sensitive lubrication applications.
The system is designed to extend machinery life, reduce operating costs, and improve overall equipment productivity through automated lubrication delivery.
The G3 Standard Automatic Lubrication Pump is an automatic lubrication pump used to supply grease or oil to multiple lubrication points across a machine or system.
Unlike fully integrated controller-based models, this version is designed to work with external machine controls. This allows operators to use existing PLC or control systems to manage lubrication cycles, reducing system complexity and cost.
It is suitable for injector-based and series progressive lubrication systems, depending on the installation requirements.
This makes the Graco G3 Standard Automatic Lubrication Pump suitable for installations where lubrication control is managed centrally through machine automation systems.
G3 Standard Automatic Lubrication Pump Specifications |
|
| Maximum Working Pressure |
35.1 MPa, 351.6 bar
|
| Power | |
| 100–240 VAC |
88 – 264 VAC; 0.8 A current, 90 VA Power, 47/63 Hz, Single phase, in rush/locked rotor, max 40A (1ms)
|
| 12 VDC |
9 – 16 VDC; 5 A current, 60 W, inrush/locked rotor 12 A
|
| 24 VDC |
18 – 32 VDC; 2.5 A current, 60 W, inrush/locked rotor 6 A
|
| Outputs — Low Level (Dry Contact) | |
| Contact Rating |
10 Watts Maximum
|
| Switch Rating |
200 VDC Maximum
|
| Switching Current |
0.5 A Maximum
|
| Carry Current |
1.2 A Maximum
|
| Fluid | |
| Grease Models |
Grease NLGI 000 – #2
|
| Oil Models |
At least 40 cSt oil
|
| Pumps |
Up to 3
|
| Pump Output – 2 spacers |
0.12 cubic in (2 cubic cm) / minute per outlet – 2 spacer
|
| Pump Output – 1 spacer |
0.18 cubic in (3 cubic cm) / minute per outlet – 1 spacer
|
| Pump Output – 0 spacers |
0.25 cubic in (4 cubic cm) / minute per outlet – 0 spacers
|
| Pump Outlet |
1/4-18 NPSF. Mates with 1/4-18 NPT male fittings
|
| Reservoir Size |
2, 4, 8, 12, 16 Liters
|
| IP Rating |
IP69K
|
| Ambient Temps |
-40°C to 70°C
|
| Weight (Dry – includes power cord and plug) Without follower plate |
6.03 kg
|
| Weight (Dry – includes power cord and plug) With Follower plate |
6.44 kg
|
| Wetted Parts |
nylon 6/6 (PA), trogamid T5004-060, zinc plated steel, carbon steel, alloy steel, stainless steel, nitrile rubber (buna-N), bronze, nickel plated alnico, chemically lubricated acetal, aluminum, PTFE, Grillamid
|
| Sound Data |
<60 dB
|
It is suited to applications where external control of lubrication cycles is preferred and where a cost-effective pump solution is required.
The Graco G3 Standard Automatic Lubrication Pump is designed for operators who want a reliable lubrication pump without the added complexity of an internal controller.
It provides a practical solution for automated lubrication where control is managed externally.
For technical support, system compatibility advice, or quotation requests for the Graco G3 Standard Lubrication Pump, contact FloSolve. FloSolve is an authorised Graco distributor.
